Ir Infrared Module: Ir1 Connector - Acorp 4865PE Manual

Chapter 1
Reset Switch Lead (RST)
The connector can be connected to a reset switch. Press this
reset switch to restart system.
SMI Suspend Switch LED (G-BUN) (Disabled)
This allows the user to manually place the system into a suspend
mode of Green mode. System activity will be instantly decreased
to save electricity and expand the life of certain components
when the system is not in use. This 2-pin connector (see the
figure) connects to the case-mounted suspend switch. If you
do not have a switch for the connector, you may use the "Turbo
Switch" instead since it does not have a function. If you want
to use this connector, the "Suspend Switch" in the Power
Management Setup of the BIOS SOFTWARE section should
be enabled.

1.7.10 IR infrared module: IR1 Connector

This connector supports the optional wireless transmission
and reception infrared module. You must configure the setting
through the BIOS setup to use the IR function.
IR1
1
Vcc5
NC
IRRX
GND
IRTX
5
NC
CIRRX
5VDU
GND
NC
1-22
Motherboard 4865PE
RTL
8100BL
Socket 478