Overview; Removing The Chassis Cover; Disconnecting The Chassis From The Power Source - Advantech HPC-7282 User Manual

2.1

Overview

The following instructions explain the procedures for installing a motherboard, add-on
cards, and disk drives into the HPC-7282.
Caution! Use caution when installing or operating the components with the chas-
sis open. Always turn off the power, unplug the power cord, and ground
yourself by touching the metal chassis before handling any components
inside the machine.
2.2

Removing the Chassis Cover

2.2.1

Disconnecting the Chassis from the Power Source

1. Turn off all peripheral devices and turn off the power supply to the HPC-7282.
2. Disconnect the AC power cords from the system.
3. Disconnect all cables and label the cables for easy identification.
Warning! Use a grounding wrist strap designed to prevent static discharge when
handling components.
After completing the above steps, remove the chassis cover and install components
and devices into the chassis by following the instructions provided in this chapter.
2.2.2 Removing the Chassis Cover
HPC-7282 User Manual
Figure 2.1 Top Cover Removal
6