Use Snmp - Dynamix HP HP-51M User Manual

DYNAMIX HP-51M Coax MDU Master Bridge User's Guide

Use SNMP

The SNMP Agent resides in HP-51M will handle requests from remote SNMP Manager. The HP-51M SNMP
agent supports standard SNMP community-based operations (SNMP V1/V2c) as 'SET', 'GET' and 'TRAP'.
You need to specify the correct Read-Only Community Name into bridge before any SNMP 'GET' operation can
work. Also set up the Read/Write Community Name for SNMP 'SET' operation. 'SET' operation can modify the
setting within HP-51M. While 'Get' is read-only operation used to report the requested SNMP data to SNMP
manager.
You may need the accompanying proprietary MIB file for some popular SNMP/MIB manager software to manage
the bridge system. The HP-51M bridge system may also be integrated into your original SNMP management system
by this MIB file.
Each SNMP manager will assign the name of the community it belongs to in its 'GET', 'SET' and 'TRAP'
operations. The community name could be unique to allow set of SNMP managers to access one SNMP agent, any
operation with mismatched community name will be rejected by agent. For security consideration, you should either
change the factory default community name or disable SNMP function in HP-51M.
The default 'GET' community name of HP-51M is 'public', and default 'SET' community name is 'private'.
For the following example, the two 'TRAP Server' with IP address '192.168.1.100' and '192.168.1.101' will
capture all traps emitted from HP-51M SNMP agent,
40