Firmware/Driver Files - Dynamix HP HP-51M User Manual

DYNAMIX HP-51M Coax MDU Master Bridge User's Guide
manage other connected Slave EPs. The HCNA MAC exists only in HCNA (coax) domain, and is unaware for any
EP end-user. System manager use system IP address and Ethernet MAC address to access HP-51M. Each HP-51M
device should be stamped with both Ethernet MAC and HCNA MAC for identification.
Figure 4: EP Management Architecture

Firmware/Driver Files

HP-51M flash ROM is capable of storing the following files:
1. System bootcode (OS bootloader)
2. System firmware (OS)
3. Local (Master) HCNA driver for chipset 3110 (resides at HP-51M)
4. EP (Slave) HCNA drivers for chipset 3010 (resides at EP)
5. Smart EP (Slave) HCNA drivers for chipset 3110 (resides at Smart EP like HP-51S).
6. HCNA physical connection diagnosis utility
To upgrade any one of them, you need to follow the 2-stage procedure. First to 'Upload' the file onto HP-51M
Upload Area, then do the real upgrade by 'Activate' it on demand -- the file will move into Working Area for
running. Refer the following section entitled "Example to Upload then Activate System Firmware and HCNA
Driver" for more details.
EP
Open 'EP Management' window, click on 'Refresh' button first to scan all connected EPs. For example,
7