Table of Contents
Advertisement
DYNAMIX HP-51M Coax MDU Master Bridge User's Guide
For example,
To access your listed SNTP server by its domain name instead of IP address, the 'DNS Server' and 'Default
Gateway' in 'System Setup' window need to be set up correctly. In order for HP-51M to access the SNTP server
by its domain name.
Static MAC
It may be necessary to bind and secure the server/gateway MAC addresses to port LAN1/LAN2 of HP-51M for
security. Static MAC is using to prevent MAC-spoofing-attack in Ethernet network. For example,
We bind MAC address 00-01-40-fe-ed-01 to port LAN1 and MAC address 00-01-40-fe-ed-02 to port LAN2,
Reboot System
Reboot Master HP-51M only. EP untainted.
Default Setting
Restore all settings of HP-51M to factory default, including username/password, IP address, privacy mode/key, etc.
Press 'Reset' button locally for lasting 5 seconds works alike. HP-51M will reboot afterward.
Upload Firmware
Upload 'Bootcode' / 'System firmware' / 'Master driver (3110)' / 'EP driver (3010 or 3110)' / 'Diagnosis utility'
onto HP-51M 'Upload Area'. Not functional yet, wait to 'Activate Firmware' or to 'Upgrade' driver. Refer the
following
"Example to Upload then Activate System Firmware and HCNA
Driver" for more details.
23
Advertisement
Table of Contents
