New System Firmware And Hcna Driver Files; System Firmware; Upload The New System Firmware - Dynamix HP HP-51M User Manual

DYNAMIX HP-51M Coax MDU Master Bridge User's Guide
In the example, the onboard Master (denoted 'Local') device driver version is '2.7.5-2'. The two 3010 EP's device
driver version is '2.7.5-2', and the five 3110 Smart EP's driver version is also '2.7.5-2'. It is possible that these three
type HCNA devices could be equipped with different driver versions and cooperate inside one working coax
network.

New System Firmware and HCNA Driver Files

In this example, preparing the following binary files to upgrade the HP-51M and the seven connected EPs,
♦ HP51M_Sysfw_V3.06.bin  HP-51M system firmware version '3.06'
♦ HP51M_Driver_V2.7.5-3.bin  HCNA device driver version '2.7.5-3', include Master(Local) driver version
'2.7.5-3' , 3010 EP driver version '2.7.5-3', and 3110 Smart EP(as HP-51S) driver version '2.7.5-3'

System Firmware

Upload the New System Firmware

Start from the 'Upload Firmware' window and click on 'Upload' button,
A count-down counter for entering the uploading mode,
Click 'Continue' button to proceed,
25