Device Noise In Master And Ep; Physical Connection Between Master And Ep - Dynamix HP HP-51M User Manual

DYNAMIX HP-51M Coax MDU Master Bridge User's Guide

Device Noise in Master and EP

'Noise Test' measures each individual device HCNA interface noise level (noise floor). For example, use a Master
alone with 75Ω terminator, here shows the Master noise frequency spectrum diagram after test,
Connect only one EP to Master, with 30dB attenuator add-on. Here's the 'Noise Test' result of the connected EP,

Physical Connection between Master and EP

Connect only one EP to Master, with 30dB attenuator add-on. Here's the result by clicking on 'Tx Diagnose' button
to perform a Cert test between HP-51M and connected EP,
18