Table of Contents
Advertisement
hpnareboot
[-a
<ip>
ipconfig
-m
<mask>
-g
<default gateway>]
[-s
<set>
[-c
<act/deact>]
[-a
<ip>
logserver
-v
-k
<on/off/key(0x...)>
master
[name]
-o
<oldpasswd>
-n
<newpasswd>
passwd
[-n
<count>]
[-w
<timeout>]
ping
[-l
<pktlen>]
address
reboot
<mac>
rmep
[-s
<telnet/http>
[-c
<on/off>]
[-p
<port)>]
service
[-t
<idle>] ]
[-f]
[-n
<note>]
showep
[-m
<mac>]
showlog
showmaster
[-c
<act/deact>]
[-p
<port>]
[-n
<name>]
[-t
<contact>]
[-l
<location>]
snmp
[-r
<rcomm>]
[-w
<wcomm>]
Reset Master HCNA device'
Display or set up system IP network, include IP address <ip>,
subnet mask <mask>, and default gateway
Display or set up Unix-like Syslog servers(max 5 set)
<set>: server index, at most 5 servers (0~4)
<act/deact>: activate or de-activate the server with IP address
<severity>] ]
<ip>
<severity>: select the severity level, refer section
default level
Set up Master HCNA device
command
the working values with the setting ones) Use command
to upgrade EP with the new 'Privacy Mode/Key'.
<on/off>: set 'Privacy Mode' to ON or OFF, default
<key(0xnnnn)>,
default
Change user's password, user can update its own password.
Only superuser has the privilege to rewrite other's password,
[name]: user's account name, default to current login name if
not supplied
<oldpasswd>: old password, superuser can bypass this
parameter
<newpasswd>: new password
ICMP ping function,
<count>: number of ping requests(max 65535)
<timeout>: expiry timer in each reply(1~60 sec)
<pktlen>: sent packet length(64~1500)
address: target IP address
Reboot system
Remove designated EP
<mac>: EP MAC
Display or set up Telnet and Http service.
<telnet/http>: configure Telnet or Http
<on/off>: enable or disable this service
<port>: TCP port number (0~65535)
<idle>: expiry timer to logoff automatically (0~32767 sec)
default
Display EP connection status and properties, and check if it
matches the stored
-f: force to re-scan all connected EPs
-n: display EP with matched
-m: display EP with MAC address
Display the (Syslog) logged messages.
Display Master HCNA information, include driver version,
properties(Privacy Mode, Privacy Key)
Display or set up basic SNMP system configuration.
<act/deact>: activate(enable) or de-activate(disable) SNMP
agent
<port>: SNMP UDP port number (0~65535), default
<name>: SNMP system name
<contact>: SNMP system contact information
<location>: SNMP system location information
<rcomm>: SNMP system read-only community name, default
'public'
<wcomm>: SNMP system read-write community name, default
'private'
DYNAMIX HP-51M Coax MDU Master Bridge User's Guide
6
(info)
Privacy Mode
'upmaster'
to take effect on Master device. (replace
n
is 0~F: 4-digit 'Privacy Key' in hexadecimal,
0x0
Properties
<mac>
to be removed
300
seconds
Properties Profile
<note>
37
<default
gateway>.
"System
Log",
setting values. Use
'upep'
OFF
Profile.
in HP-51M.
<mac>
161
Advertisement
Table of Contents
