Using The Device - Verathon BFlex 2 Operation & Maintenance Manual

Using the Device

Before use, set up the device according to the instructions in the previous chapter, and verify the setup by
completing the procedure
Please read the
BFlex 2 Single‑Use bronchoscopes are equipped with an anti‑fog feature that reduces camera fogging
during use. To optimize the feature fully, you must allow the bronchoscope to warm up for 30–120 seconds
prior to use, depending on the ambient temperature and humidity of the clinical environment. Full warmup is
not necessary to use the device; if desired, you may begin the insertion procedure immediately.
Using the BFlex 2 components consists of the following:
• Prepare the GlideScope System
• Position the Handle and Controls
• Insert Through a Tube or Catheter (Optional)
• Insert and Flex the Bronchoscope
• Introduce Liquids or Accessories (Optional)
• Remove the Bronchoscope
Note: Follow accepted practices in order to protect the bronchoscope from contamination prior to insertion.
Operations & Maintenance Manual: Using the Device
Perform a Functional Check
Warnings & Cautions section before performing the following tasks.
on page 14.
15
0900‑5209 REV‑00