modway MOD-5532 Quick Start Manual page 2

MOD-5532/5533
STEP 1:
Insert Low Post (6) into Headboard (1) as shown.
Attach by using Arc Washer (E) and Short Bolt (A) from the holes on the back of Low Post (6) and Headboard (1).
Use Allen Wrench (G) to
E
A
E
A
G
Ax4
STEP 2:
Take out all Double Slats (4), Single Slats (5) and Side Rails (3) and place them as shown.
Insert one end of Single Slats (5) into Rubber Insert (F), then insert them into the corresponding holes on one piece of
Side Rail (3) as shown.
Attach Double Slats (4) to the same Side Rail (3) by using Short Bolts (A). Do not fully tighten Short Bolts (A) with
Allen Wrench (G) yet.
Repeat above for the other Side Rail (3).
Use Allen Wrench (G) to
3
4 5 5 5 4 5
3
Ax16
Customer Service 908-368-1025︱www.modwayfurniture.com
FULL/QUEEN BED
fixation
Short Bolts (A) clockwise until secure.
1
6
Ex4 Gx1
fixation all Short Bolts (A) clockwise until secure.
5 4 5 5 5 4
Fx16 Gx1
6
3
5
1
6
Hardware & Tool required
3
4
3
A
A
F
Hardware & Tool required
Page 2 of 3
G