Page 1
5569/5570 QUEEN BED QUEEN step-by-step Approximately have ×36 ×5 ×14 Flat Washer Side Plastic Cover ×28 ×14 Center Plastic Cover Post-1 ×1 Post-2 ×1 Post-3 ×2 Side Rail ×2 5 Center Rail ×1 6 Stretcher ×3 7 Support Leg ×3 8 Cross Bar-1 ×2 9 Cross Bar-2...
Page 2
569/5570 QUEEN BED Insert the connector on the Post-3 (3) into the Cross Bar-1 (8) as shown then insert them into the corresponding holes on Cross Bar-1 (8) by using Bolts (A) and Allen Wrench (F) Place Connect Bar (10) to the assembled Post-3 (3) by using Bolts (A) Allen Wrench (F) as shown.
Page 3
5569/5570 QUEEN BED Post-3 (3) Insert the connector on the Post-2 (2) & into the Cross Bar-2 (4) as shown then insert them into the corresponding holes on Cross Bar-2 (9) by using Bolts (A) and Allen Wrench Repeat the same steps for the remaining Post-1 (1) &...
Page 4
5569/5570 QUEEN BED STEP 5 Insert 5 pieces of Bolt (B) into the 5 holes on Center Rail (5) to connect it with Support Leg (7) as shown. Insert Bolt (C) into the holes on Center Rail (5) and Stretcher (6) to connect it with Support Leg (7) as shown. Secure the above 6 pieces of Bolts (B&C) with Nuts (E) &...
Need help?
Do you have a question about the MOD-5569 and is the answer not in the manual?
Questions and answers