Verifying Settings; Returning To The Initial Settings - Panasonic PT-F100NTE Network Manual

Network setting of the projector

Verifying settings

Select [STATUS] at the network menu and press the [ENTER] button.
Your current settings appear.
PT-FW100NT
PICTURE
POSITION
LANGUAGE
OPTION
SECURITY
NETWORK
RETURN
SELECT
ENTER
The status of the following will appear.
WIRED LAN
DHCP "OFF" - "ON"
IP ADDRESS (See page 53)
SUBNETMASK (See page 53)
GATEWAY (See page 53)
MAC ADDRESS

Returning to the Initial Settings

You can return the changed settings to the initial conditions.
1
Select [INITIALIZE] at the network menu and press the [ENTER] button.
PT-FW100NT
PICTURE
POSITION
LANGUAGE
OPTION
SECURITY
NETWORK
RETURN
SELECT
ENTER
You will be prompted to enter the password if [ON] has been selected as the [INPUT PASSWORD] setting on the
[ SECURITY] menu.
Select [OK] with the [
2
button.
WIRED LAN
WIRELESS LAN USER1
NAME CHANGE
OFF
INPUT PASSWORD
PASSWORD CHANGE
NETWORK STANDBY OFF
WEB CONTROL ON
LIVE MODE CUT IN OFF
STATUS
INITIALIZE
WIRELESS LAN
ANTENNA LEVEL
NETWORK
MODE
CHANNEL
SSID
AUTHENTICATION
DEFAULT KEY
ENCRYPTION
DHCP
IP ADDRESS
SUBNETMASK
GATEWAY
MAC ADDRESS
WIRED LAN
WIRELESS LAN USER1
NAME CHANGE
OFF
INPUT PASSWORD
PASSWORD CHANGE
NETWORK STANDBY OFF
WEB CONTROL ON
LIVE MODE CUT IN OFF
STATUS
INITIALIZE
] buttons and press the [ENTER]
(cont.)
(The strength of the connection will appear.)
"– – –", "1" - "4", "USER1" - "USER3"
"AD-HOC" - "INFRASTRUCTURE"
Refer to page 5 for usable channels.
(See page 55)
"OPEN" - "SHARED" - "WPA-PSK"
"-" - "1" - "4"
"NONE" - "WEP" - "TKIP" - "AES"
"OFF" - "ON"
(See page 56)
(See page 56)
(See page 56)
59
INITIALIZE
INITIALIZE
OK CANCEL
RETURN
SELECT
ENTER