One Shot Function; Shutter Function; Pointer Function - Panasonic PT-F100NTE Network Manual

Useful Functions

One shot function

A snapshot of the current computer screen is transmitted to the projector.
1
Cancel all live mode transmission.
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
2
into a full screen display (the status when no index window is displayed).
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, the
screen will switch over to a full screen display.
Check the status indication on the launcher to make sure that transmission is
3
possible (check that the green lamp is lit).
4
Click [ ] on the launcher.
To project only the required parts of the computer screen as still images, you can use the one shot function to send the parts
which you have selected using the selective area transmission function.

Shutter function

Blanks the screen for a moment.
1
Click [ ] on the launcher.
The image is turned off.
When sound is output, the sound also goes out.
2
Click [ ] again.
The image comes back.
The shutter function is available only in live mode or in multiple source live mode.

Pointer function

You can change the shape of the pointer appearing on the projection screen in live mode or multiple source live mode to one
that can be used for presentation purposes.
Click [ ] on the launcher.
Quitting pointer function
Click [ ] on the launcher again.
(cont.)
47