Other Operations For Connection; Operations When Password Entry Is Required For Connection; Adding And Deleting Connections - Panasonic PT-F100NTE Network Manual

Other operations for connection

Operations when password entry is required for connection

When a projector with the [ ] mark is selected, the window shown to the right appears. Enter the
password and click [OK]. (See page 57)
• Click [CANCEL] at the password entry window to return to launcher (See page 33).
• When an incorrect password is entered, an error message appears.
Click [OK] to return to the password entry window and enter the correct password again.

Adding and deleting connections

When [Network] is set to [U] and the desired projector is not displayed at the <Select Access Port> window, connections can be
added and deleted by the following operations.
Adding a connection
Click [Designate] at the <Select Access Port> window.
1
The window shown to the right appears.
Click [ADD] and enter the IP address
2
connection to be added, and then click [REGISTER].
※ "Glossary" (See page 70)
The newly registered connection is added to the connection list in the window shown in step 1.
Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
※ (including its periods) of the
30