When Logging On Without Administrator Authority - Panasonic PT-F100NTE Network Manual

Connecting with wireless LAN

When logging on without administrator authority

Before starting Wireless Manager ME 4.5, it is necessary to carry out "Computer settings" (next page) under the administrator
authority in advance.
Next, logon as a restricted user or [GUEST], and start Wireless Manager ME 4.5.
Confirm to your system administrator before changing any settings.
Following settings are examples of when using a default setting projector.
Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
Select [USER 1] - [USER 3] from [WIRELESS LAN] at the network menu and press
2
the [ENTER] button.
Set the details of network and select [OK].
3
As for network setting items, see pages 54 - 56.
Confirm to your system administrator before changing any settings.
<Example>
DHCP
※
IP ADDRESS ※
SUBNETMASK ※
SSID ※
MODE
AUTHENTICATION
ENCRYPTION
ENCRYPTION KEY
SETTING
※"Glossary" (See pages 70 - 71)
(cont.)
OFF
192.168.11.100
255.255.255.0
Panasonic Projector
AD HOC ※
OPEN ※ (Some computers may require connection by [SHARED
NONE .... When not performing encryption
WEP ...... When performing encryption
When [ENCRYPTION] setting is [WEP
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY].
※ ]:
23
※ ] authentication.)