Installation Free Set Up - Panasonic PT-F100NTE Network Manual

Installation free set up

You can use Wireless Manager ME 4.5 without installing it in the computer.
If you copy Wireless Manager ME 4.5 to a removable medium, such as an SD card, you can use Wireless Manager ME 4.5
without installing it in any computer that permits you to access this removal medium.
When copying Wireless Manager ME 4.5 to a removable medium, empty capacity of at least 32 MB is required.
1
Insert provided CD-ROM into the CD-ROM drive.
Setup screen appears.
Click [Installation Free Set Up].
2
[Direct CD-ROM Startup] and [Other Media Source Startup, Make Copy Here] appear on the window.
When using without copying the program: Click [Direct CD-ROM Startup].
3
A
Wireless Manager ME 4.5 starts up, and the <Select Access Port> window appears.
Operation is the same as when operating after installing CD-ROM.
When using after copying the program: Click [Other Media Source Startup, Make
B
Copy Here].
A window opens to select the destination to save.
<If you chose B in step 3, follow steps 4 - 5.>
Select the destination to save, and click [OK].
4
CD-ROM data is copied to the destination.
After the copy ends, click [Close] of the setup screen.
Double-click the Wireless Manager ME 4.5 icon (WMstart.exe) in the destination to
5
save chosen in step 4.
Wireless Manager ME 4.5 starts up.
Operation is the same as when operating after installing CD-ROM.
If selecting removable medium as the destination to save, ensure that the removable medium is recognized by the
computer to which you wish to connect the projector.
Some removable mediums start the program automatically.
• When using without installing, following functions are not available.
• Selective area transmission (See page 45)
• Secondary display transmission (See page 46)
• Producing audio along with video at live mode (See page 49)
• Automatic connection by double-clicking (see page 51)
• Operation is slower compared to when the computer is used with Wireless Manager ME 4.5 installed.
14