Table of Contents
Advertisement
On-screen menus
Basic operations on menu
screen
Press the "MENU" button.
The MAIN MENU appears on the screen.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
Select the desired item with the
button.
Selected items are displayed in blue.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
Press the "ENTER" button to establish
your selection.
The submenu for the selected option will now
open. (Example: PICTURE Menu)
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:ADJUST
Highlight the desired adjustment item
with the
or
or adjust the parameter value with the
or
button.
For the items such as "COLOR", "TINT", "CONTRAST"
and "BRIGHT", an individual adjustment screen with an
individual bar graph as shown below is displayed by
pressing the ENTER button.
CONTRAST
• If no button is operated for approx. 5 seconds while the
individual adjustment screen is displayed, the screen
will return to the previous page.
46
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
button, then change
32
Returning to the previous
screen
• When the "MENU" is on the screen, pressing the
"MENU" button returns to the previous page.
• When the MAIN MENU is on the screen, pressing the
"MENU" button clears all menus from the screen.
Menu items shown in gray
characters
• Some menu items may not be valid for certain signal
formats applied to the projector.
The menu items that cannot be adjusted or used are shown
in gray characters, and they cannot be selected.
Menu items setting
or
The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt "
changing the setting.
• A prompt "
separate bar graph.
• When
and
under the items in the "OPTION" screen, they
indicate that there are more adjustment (items).
Resetting to the factory
default
STD (standard) button is used to reset all of the
projector adjustment values to the default levels which
were set at the time of shipment from the factory. It is
pressed after the respective adjustment mode screen
has been displayed.
• When the Menu screen is displayed:
A "STD" indicator appears on the upper right corner
of the menu.
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:ADJUST
CHANGE" appears when
ADJUST" appears for a
buttons are displayed above or
STD
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
Advertisement
Table of Contents
