Using Wireless Manager ME
Operations when password entry is required for connection
When a projector with the [
shown to the right appears. Enter the password and click [OK].
Notes:
• Click [CANCEL] at the password entry window to return to launcher (See page 16).
• When an incorrect password is entered, an error message appears. Click [OK] to
return to the password entry window and enter the correct password again.
Adding and deleting connections
When [Network] is set to [USER] at the connection select window, connections can be
added and deleted by the following operations.
I Adding a connection
Click [Designate] at the
1
connection select window.
The window shown to the right appears.
Click [ADD] and enter the IP address
2
(including its periods) of the connection
to be added, and then click [REGISTER].
The newly registered connection is added to the
connection list in the window shown in step 1.
I Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
] mark is selected, the window
26
(cont.)