Detect Rogue Aps And Move The Rogue Aps To The Trusted Ap List - TP-Link Omada EAP230-Wall User Manual

Detect Rogue APs and Move the Rogue APs to the Trusted AP List

Follow the steps below to detect the nearby APs and move the trusted ones to the Trusted
AP list.
1. In the Settings section, check the box to enable Rogue AP Detection. Click Save.
2. In the Detected Rogue AP List section, click
3. Wait for a few seconds without any operation. After detection is finished, the detected
APs will be displayed in the list.
The following table introduces the displayed information of the APs:
MAC
SSID
Band
Channel
Security
Displays the MAC address of the AP.
Displays the SSID of the AP.
Displays the frequency band the AP is working on.
Displays the channel the AP is using.
Displays whether the security mode is enabled on the AP.
60
.