TP-Link Omada EAP230-Wall User Manual page 93

Set Community
Set Source
3. Click Save.

Note:
Defining community can allow management systems in the same community to communicate
with the SNMP Agent. The community name can be seen as the shared password of the network
hosts group. Thus, for the security, we recommend that modify the default community name before
enabling the SNMP Agent service. If the field of community is blank, the SNMP Agent will not
respond to any community name.
Set Community has the read and write right of the device's SNMP
information. Enter the community name that allows read/write access to
the device's SNMP information. The community name can be considered
a group password. The default setting is private.
Defines the IP address (for example, 10.10.10.1) for management
systems that can serve as Set Community to read and write the SNMP
information of this device. The default is 0.0.0.0, which means all hosts
can read and write the SNMP information of this device.
89