Detected Rogue Ap List; Trusted Ap List - TP-Link Auranet EAP110 User Manual

5.6.2 Detected Rogue AP List

Information about the detected rogue APs is displayed in the list. By default, the status
of the detected rogue AP is unknown. You can click Known in Action column to move
the AP to the Trusted AP List.
Click to scan rogue APs. Make sure you have enabled Rogue AP Detection
and saved the setting before you click the button.
Action: Click Known to move the AP to the Trusted AP List. After the configurations
are saved, the moved AP will not be displayed in the Detected Rogue AP
List.
MAC: The MAC address of the rogue AP.
SSID: The SSID of the rogue AP.
Displays the frequency band which the wireless network of the rogue AP
Band:
operates at.
Channel: The channel on which the rogue AP is currently broadcasting.
Displays the enabling or disabling of the security mode of the wireless
Security:
network.
Beacon The beacon interval used by the rogue AP.
Interval:
Beacon frames are transmitted by an AP at regular intervals to announce
the existence of the wireless network. The default behavior is to send a
beacon frame once every 100 milliseconds (or 10 per second).
Signal: The strength of the radio signal emitting from the rogue AP.

5.6.3 Trusted AP List

Information about the trusted APs is displayed in the list.
Figure 5-34 Detected Rogue AP List
36