TP-Link Omada EAP230-Wall User Manual page 22

Hide thumbs Also See for Omada EAP230-Wall:

Table of Contents

scan all EAPs in the same network segment, and find the IP address of the EAP. In the

following figure, for example, the IP address of the EAP is 192.168.0.5.

Tips:

Some EAP models only works with certain software version of Discovery Utility. If your Discovery

Utility can't discover your EAP anyway, try a different software version.

2. To log in to the EAP, launch a web browser and enter the IP address of the EAP in the

address bar. The login page will appear. By default, both the username and password

are admin.

Tips:

To facilitate access to the EAP, you can set a static IP address for the EAP and remember it well or

write it down. But make sure that this IP address is not being used by other devices in the same LAN.

For detailed instructions about how to set a static IP address for the EAP, refer to

IP Address of the EAP

4.1 Manage the

Table of Contents