Hardware Description - LevelOne EAP-110 User Manual

2.3 Hardware Description

This section depicts the hardware information including all panel description.
Connector Panel
1
5V 1A
2 LAN(PoE)
3 WES
3 Reset
Antenna
4
Connector
EAP-110 Connector Panel
Attach the power adapter here.
Attach the Ethernet cable here for connecting to wired local network. This port supports
PoE as well which can be connected to a PSE (power sourcing equipment) as an
alternative power sourcing.
Press to start running WES process.
Master (Press for more than 3
WES seconds until the WLAN LED
blinks twice and then release)
WES Start WLAN LED BLINKING SLOWLY
WES Success
WES Fail
Press and hold the button for more than 10 seconds until WLAN LED OFF. WLAN ON while
reset is successful.
Attach the antennas here. The system supports one RF interface with two SMA connectors.
WLAN LED ON constantly for 5 seconds
WLAN LED OFF for 5 seconds
6
Slave (Press once until the WLAN
LED starts blinking and then
release right away)
WLAN LED BLINKING QUICKLY