Hardware Description - LevelOne EAP-300 User Manual

Section 2.03 2.3 Hardware Description
This section depicts the hardware information including all panel description.
Connector Panel
1 Console
2 Restart/Reset Button
3
12 2A
4 WES Button
5 LAN
6 USB
Antenna Panel
Antenna Connector:
EAP-300 Connector Panel
Attach the serial cable here.
Press once to restart the system; Press and hold for more than 5
seconds to reset to factory default.
Attach the power adapter here.
Press to start running WES process.
Attach the Ethernet cable here for connecting to the wired local
network. This port is PoE compatible as well.
For future use.
EAP-300 Antenna Panel
Attach the antennas to the above 3 connectors.
6