LevelOne EAP-110 User Manual page 44

 Dynamic WEP Settings:
Dynamic WEP: For 802.1X security type, Dynamic WEP is always enabled to automatically
o
generate WEP keys for encryption.
WEP Key Length: Select from 64-bit or 128-bit key length.
o
Re-keying Period: The time interval for the dynamic WEP key to be updated; the time unit is in
o
second.
 RADIUS Server Settings (Primary/Secondary):
Host: Enter the IP address or domain name of the RADIUS server.
o
Authentication Port: The port number used by the RADIUS server. Specify a port number or
o
use the default, 1812.
Secret Key: The secret key for the system to communicate with the RADIUS server.
o
Accounting Service: Enabling this option allows accounting of login and logouts through the
o
RADIUS server.
Accounting Port: The port number used by the RADIUS server for accounting purposes.
o
Specify a port number or use the default, 1813.
Accounting Interim Update Interval: The system will update accounting information to the
o
RADIUS server every interval period.
•
WPA-PSK: WPA-PSK (Wi-Fi Protected Access Pre-shared Key) is a pre-shared key authentication
method, a special mode of WPA.
 Cipher Suite: Select an encryption method from TKIP (WPA), AES (WPA), TKIP (WAP2), AES
(WAP2), or Mixed.
 Pre-shared Key Type: Select a pre-shared key type: PSK (Hex) or Passphrase.
 Pre-shared Key: Enter the key value for the pre-shared key; the format of the key value depends
on the key type selected.
 Group Key Update Period: The time interval for the Group Key to be renewed; the time unit is in
seconds.
Security Settings: WPA-PSK
44