LevelOne EAP-110 User Manual page 24

Table of Contents

Advertisement

Step 3: Configuring MAC ACL (Access Control List)
Clicking on the hyperlink corresponding with intended VAP in the MAC ACL column, the user will be
brought to the Access Control Settings page.
Please choose among Disable, Allow, Deny, and RADIUS ACL from the drop-down menu of
Access Control Type.
1)
Disable Access Control: This means that there is no restriction for client devices to access the
system.
2)
MAC ACL Allow List: This means that only the client devices (identified by their MAC addresses)
listed in the Allow List ("allowed MAC addresses") are granted with access to the system. The
administrator can temporarily block any allowed MAC address by checking Disable, until the
administrator re-Enables the listed MAC.
An empty Allow List means that there are no allowed MAC addresses. Make sure at least the MAC
of the modifying system is included (e.g. network administrator's computer)
3)
MAC ACL Deny List: This means that all client devices are granted with access to the system
except those listed in the Deny List ("denied MAC addresses"). The administrator can allow any
denied MAC address to connect to the system temporarily by checking Enable.
Access Control Settings Page
MAC ACL Allow List
24

Advertisement

Table of Contents
loading

Table of Contents