Table of Contents
Advertisement
Section 2.03 2.3 Hardware Description
This section depicts the hardware information including all panel description.
Connector Panel
1
USB
2
WES
3
Console
4
LAN1 / LAN2
5
Reset
6
DC 12V
7
12V
Antenna Panel
Antenna Connector:
EAP-200 Connector Panel
Disabled for future usage only.
Press to start running WES process.
Attach the serial cable here.
Attach the Ethernet cable here for connection with wired local networks.
Hardware reset button, press once to reset to the system.
Attach the power socket here.
Attach the power adapter here.
EAP-200 Antenna Panel
Attach the antennas here. The system supports one RF interface
with two SMA connectors.
7
Advertisement
Table of Contents
