Secure Your Ap - LevelOne EAP-110 User Manual

5. Secure Your AP

Different VAP may require different level of security. These instructions will guide the user through setting
up different types of security for a particular VAP. Simply repeat the following steps for other VAP with
security requirement.
Step 1: Ensure the intended VAP is Enabled
On the VAP Overview page, check the table to confirm the VAP State. If it is Enabled, skip to Step 2.
If not, click on to proceed with VAP Configuration for that particular VAP.
Select Enable for the VAP field, and click SAVE. Click the Overview tab to return to the previous
table to begin the next step.
Step 2: Configure Security Settings for your VAP
VAP Overview Page
VAP Configuration Page (VAP-1 as shown for example)
18