Table of Contents
Advertisement
7.5.3 Repeater
The system supports 3 options of Repeater types including status of MAC Address, SNR, TX Rate, TX
Count and TX Errors.
•
WDS Link Status: The table will indicate the link status of all WDS interfaces.
Status: The status of the WDS link either Enabled or Disabled.
MAC Address: The MAC Address of the WDS peer.
RSSI: Received Signal Strength Indication, a measurement of received radio signal over WDS link.
TX Rate: The transmit rate of the WDS link.
TX Count: The accumulative number of transmission counts.
TX Errors: The accumulative number of transmission errors.
WDS Link Status Page
69
Advertisement
Table of Contents
