Table of Contents
Advertisement
8. Connect all cables and external attachments.
9. Power on the device.
10. Verify that the module is recognized by the device.
a. Log on to QNE as administrator.
b. Go to Control Panel > System > System Status > Hardware Information .
c. Check the values for each memory slot.
QNE Installation
The QuCPE-303x uses the QNE operating system. You can install QNE using any of the following methods.
Method
Qfinder Pro
If the device is connected to your local
installation
area network, you can do the following:
(Recommended)
Description
• Locate the device using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
QuCPE-303x User Guide
Requirements
• Computer
• Network cable
• Qfinder Pro installer
Installation and Configuration
17
Advertisement
Table of Contents
