Table of Contents
Advertisement
a. Push the retention clips outward simultaneously to release the module.
Note
Attempting to remove a module that is not completely released may damage the module and
the motherboard.
b. Verify that the module has tilted upward and is completely released from the slot.
c. Hold the module by the edges.
d. Carefully slide the module out of the slot.
Warning
• Do not touch the internal components, particularly the metal connectors.
• Do not bend the module.
6. Install a new module.
a. Align the notch with the ridge in the slot.
b. Insert the module into the slot.
c. Verify that the metal connectors are completely inserted into the slot.
d. Carefully press down on the module until the retention clips lock the module into place.
QuCPE-303x User Guide
Installation and Configuration
15
Advertisement
Table of Contents
