Table of Contents
Advertisement
Setting up the handset
Connecting the AC adaptor
L Use only the included Panasonic AC
adaptor PQLV203.
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
Battery installation
Insert the battery (A), and press it down
until it snaps into the compartment (B).
Then close the handset cover.
A
For assistance, please visit http://www.panasonic.com/phonehelp
(120 V AC,
60 Hz)
B
Battery charge
Place the handset on the charger for 4
hours before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, "Charge completed" is
displayed.
Note:
L If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
L To ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
Battery strength
Battery icon
1
2
3
4
Note:
L When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
Preparation
Battery strength
Fully charged or high
Medium
Low
Flashing: needs to be
recharged.
Discharged
9
Advertisement
Table of Contents
