Error Messages - Panasonic KX-THA11 Operating Instructions Manual

Error messages

If the unit detects a problem, one of the following messages is shown on the display.
Display message
Busy
Denied
Turn access on at
device.
Error!!
Error!!
8 handsets have
already been
registered.
---Incomplete---
Invalid
Invalid.
Please register
to the base unit
Memory full
No items stored
For assistance, please visit http://www.panasonic.com/phonehelp
Cause & solution
L The called handset or base unit is in use.
L Other users are using the line(s). Wait until the line
button light or the line status icon goes out.
L Privacy mode is on for the call you tried to join (page
29).
L The handset or base unit you tried to copy phonebook
items to is in use.
L The handset you are calling is too far from the base unit.
L The monitor feature is turned off on the destination
handset or base unit and the room cannot be monitored
(page 30).
L The handset's registration or deregistration has failed.
Move the handset and the base unit away from the
electrical appliances and try again.
L Another handset or base unit user tried to send
phonebook items to you but there was an error. Have
the other user re-send the items to you (page 23).
L 8 handsets have already been registered to the base
unit. The deregistered handset number is still retained
in the base unit. To register an additional handset, see
the operating instructions included with your base unit.
L The destination unit's phonebook memory is full. Erase
unnecessary items from the destination unit's
phonebook (page 22).
L The destination unit is out of area.
L The destination unit's user may have pressed {C} or
{s} on the handset or {SP-PHONE} on the base unit.
L There is no handset registered to the base unit
matching the extension number you entered.
L You selected your own extension number.
L The handset is not registered to the base unit. Register
the handset (page 15).
L There is no space in memory to record new songs.
Erase unnecessary songs (page 32).
L Your phonebook or redial list is empty.
L "Customize ring" is empty.
Useful Information
47