Individual Louver Setting - Hitachi airPoint Room 700 Operation Manual

5. Function Menu Screen Display

5.13 Individual Louver Setting

This function is to individually set the air direction of multiple air outlets.
NOTES:
•
This function is available when the indoor unit supports individual louvers.
•
It cannot be set while the air conditioner is stopped.
•
The fan speed changes to "Low" while this function is being set. (After the setting is completed, the unit
operation is back to normal.)
•
As for "Start-up of Heating Operation", "During Defrost Operation" and "Activation of Thermo-Controller", all
the louver angles are automatically secured horizontally when this function is activated.
•
This function is not available if two remote controllers (including a combination of wired controller + wireless
controller) are used.
5.13.1 Individual Louver Setting
1. Individual louver setting
Step1. Select "Individual Louver Setting" on the "Function
Menu" and press "OK".
Step2. Select "Individual Louver Setting" and press "OK".
NOTE:
•
If there is one indoor unit connected with the
controller, Step4 is displayed .
Step3. Press" ", " ", " ", or " " to select the indoor unit to
change the louver direction, and press "OK".
NOTE:
•
The indoor unit displayed on the screen flashes if an
individual louver is set.
Step4. Press " " or " " and select the louver from 1 to 4.
→The selected louver is opened while the unselected
louvers are closed.
40
Function Menu
Elevating Grille
Reset Filter Sign Time
Filter Cleaning
FrostWash Setting
Individual Louver Setting
Select
OK
Individual Louver Setting
Individual Louver Setting
Cancel Individual Louver Setting
OK Select
Individual Louver Setting
Select Unit to Set
00-00
00-01
00-02
OK Select
00-00
2 3 4
1
Indv. Indv. Indv. Indv.
Adjust air direction & louver angle.
A16381TMEU
(Mon) 16:30
Back
Back
Back
OK
Back