Operation Schedule Setting - Hitachi airPoint Room 700 Operation Manual

5.2 Operation Schedule Setting

This function is used to start or stop the unit operation at the set time.
The temperature can be set during operation.
The operation schedule can be set up to 5 times a day on each day of the week.
① Schedule day and time setting (Page 16 )
The desired time and temperature can be set.
Set up to 5 times a day on each day.
② Schedule turn ON / OFF setting (Page 17 )
This function temporarily prevents the schedule from running.
Schedule operation is not performed while the schedule is disabled.
This setting is normally applied during long vacation.
③ Schedule holiday setting (Page 18 )
Holidays can be set six days in advance.
On the days set as holidays, scheduled operation is not performed for only one day.
It is used when there are irregular off days such as holidays.
④ Reset setting (Page 19 )
The schedule day / time setting and holiday setting are deleted.
A16381TMEU
Operation Schedule
Verify Operation Schedule
0 6 12 18
Mon
ON
Tue
Wed
Thu Holiday
Turn OFF
Fri
Sat
Schedule
Sun
OK Select
②
①
5. Function Menu Screen Display
(Mon) 16:30
Dec 16 - Dec 23
M T W T F S S
16 17 18 1920 21 22
Reset All Reset All
Back
③ ④
15