Table of Contents
Advertisement
• It cannot be set while the air conditioner is stopped.
• The fan speed changes to "LOW" while this function is being set. After the setting is completed,
the unit operation is back to normal.
• As for "Start-up of Heating Operation", "During Defrost Operation" and "Activation of Thermo-
Controller", all the louver angles are automatically secured horizontally when this function is
activated.
• This function is not available if two remote controllers (including a combination of wired
controller + wireless controller) are used.
7.4.1 Individual Louver Setting
1 Press " " for 3 seconds to start the setting.
NOTE
If there is only one indoor unit connected with the wired remote controller, Step5 is displayed.
2 Indoor unit selecting screen is displayed.
✓ Each indoor unit has its own index number, the corresponding refrigerant number and
indoor unit address are displayed at the upper right corner of the screen.
3 Press
to select the indoor unit by changing the index number.
" " or " "
4 Press " " to confirm the selection.
NOTE
To select all the indoor units managed by this remote controller, set the "Index No." as "FF" and
confirm the selection.
PMEN0630 rev.0 - 07/2022
Refrigerant System No.
of the selected unit
Address No.
of the
selected unit
Item No.
7
23
Advertisement
Table of Contents
