Operation Schedule Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU
3 Press " " or " " to set each setting data for the selected
items.
After setting, press " " to confirm the settings and the
screen returns to the "Function Menu" screen.
• When "Execute" is selected, press " " or " " to switch the
setting items as follows: "Not Used" ↔ "Once" ↔ "Everyday".
Simple Timer
Execute
Once
OK Select

5.2 OPERATION SCHEDULE SETTING

This function is used to start or stop the unit operation at the set
time.
The temperature can be set during operation.
The operation schedule can be set up to 5 times a day on each
day of the week.
Operation Schedule
Verify Operation Schedule y p
0 6 12
Mon
ON
Tue
Wed
Thu Holiday
Turn OFF
Fri
Sat
Schedule
Sun
OK Select


10 PMML0565 rev.0 - 09/2021
( Mon ) 16:30
ON Time OFF Time OFF Time OFF Time OFF Time
08:30 17:30 17:30 17:30 17:30
(Mon) 16:30
18
Dec 16 - Dec 23
M T W T F S S
16 17 18 1920 21 22
R R R es es ese e e t All Reset All
Back
 
• When "ON Time" or "OFF Time" is selected, the setting time
can be adjusted in 30-minute increments by pressing " " or
" ". If you press and hold " " or " ", the number will
increase or decrease continuously.
• When " " is selected, if you select "OK", the confirmation
screen is displayed. Select "Yes" and press "OK" to reset the
"Simple Timer" setting and the screen returns to Step2.
If you select "Cancel", the screen still returns to Step2.
Reset the Simple Timer Setting?
Back
OK Confirm
 Schedule day and time setting
Setting"
The desired time and temperature can be set.
Set up to 5 times a day on each day.
 Schedule turn ON / OFF setting
Setting"
This function temporarily prevents the schedule from running.
Schedule operation is not performed while the schedule is
disabled.
t All t All
This setting is normally applied during long vacation.
 Schedule holiday setting
Holidays can be set one week in advance.
On the days set as holidays, scheduled operation is not
performed for only one day.
It is used when there are irregular off days such as holidays.
 Reset setting
The schedule day / time setting and holiday setting are deleted.
Yes Cancel
"5.2.1 Schedule Day and Time
"5.2.2 Schedule Turn ON/OFF
"5.2.3 Schedule Holiday Setting"
"5.2.4 Reset the setting"
Back