JVC GR-DVL515 Instructions Manual page 75

SYMPTOM
26. The indicators and messages
do not appear.
27. Images on the LCD monitor
appear dark or whitish.
28. The rear of the LCD monitor
is hot.
29. The indicators and the image
colour on the LCD monitor
are not clear.
30. The LCD monitor or
viewfinder indications blink.
31. Coloured bright spots appear
all over the LCD monitor or
the viewfinder.
32. During recording, sound
cannot be heard.
33. Play, Rewind and Fast-
Forward functions do not
work.
34. A memory card cannot be
played back.
Downloaded from:
26. • "TIME CODE" is set to "OFF"
27. • In places subject to low
• When the LCD monitor's
28. • The light used to illuminate
29. • This may occur when the
30. • Certain Fade/Wipe effects,
31. • The LCD monitor and the
32. • This is normal.
33. • The Power Switch is set to
34. • The Power Switch is set to
• The VIDEO/DSC Switch is set
https://www.usersmanualguide.com/
POSSIBLE CAUSES
in the Menu Screen.
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
the LCD monitor causes it to
become hot.
surface or the edge of the LCD
monitor is pressed.
certain modes of Programme
AE with special effects, "DIS"
and other functions that
cannot be used together are
selected at the same time.
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red, green
or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
" " or " ".
" " or " ".
to "VIDEO".
CORRECTIVE ACTION
26. • Set "TIME CODE" to "ON" in
the Menu Screen
( pg. 49, 50).
27. • Adjust the brightness and
angle of the LCD monitor
( pg. 16, 17).
28. • Close the LCD monitor to turn
it off or set the Power Switch
to "OFF", and let the unit cool
down.
29.
————
30. • Re-read the sections covering
Fade/Wipe effects, Pro-
gramme AE with special
effects and "DIS" (
41, 48).
31.
————
32.
————
33. • Set the Power Switch to
" " ( pg. 21).
34. • Set the Power Switch to
" " ( pg. 28).
• Set the VIDEO/DSC Switch to
" ".
CONTINUED ON NEXT PAGE
75
EN
pg. 38 –