Video Playback; Normal Playback; Still Playback; Shuttle Search - JVC GR-DVL515 Instructions Manual

VIDEO PLAYBACK

Power Switch
Play/Pause Button (4/6)
Rewind Button (2)
Stop Button (5)
VIDEO/DSC Switch (GR-DVL915/
DVL715/DVL515 only; open the LCD
monitor to access this switch)

Still Playback:

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder's power is automatically turned off.
● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search:

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
● During playback, press and hold 2 or 3 . The search continues as long as you hold the button. Once you
release it, normal playback resumes.
● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback:

1) Engage Still Playback.
2) Rotate the MENU/BRIGHT wheel towards "+" for forward Frame-By-Frame Playback, or towards "–" for reverse
Frame-By-Frame Playback during Still Playback.
To resume normal playback, press 4/6.
● You can also use the provided remote control for Frame-By-Frame Playback (
Slow-Motion Playback, Playback Special Effects and Playback Zoom
Available only with the remote control (provided) (
Downloaded from:
Lock Button
Power Zoom Lever (VOL.)
Fast-Forward
Button (3)
Speaker
Pauses during playback.
Allows high-speed search in either direction.
Allows frame-by-frame search.
https://www.usersmanualguide.com/

Normal Playback

1
Load a tape ( pg. 12).
2
Set the VIDEO/DSC Switch to "VIDEO" (GR-DVL915/
DVL715/DVL515 only), then set the Power Switch to
" " while pressing down the Lock Button located
on the switch. To start playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards "+" to
turn up the volume, or towards "–" to turn down the
volume.
NOTES:
● If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off automati-
cally. To turn on again, set the Power Switch to "OFF", then
to " ".
● The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
● You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: "
not appear.
• During Stop mode, none of the indications are displayed.
● When a cable is connected to the AV connector, the sound
is not heard from the speaker.
pg. 59, 60).
21
EN
pg. 22).
"
" does
pg. 59).