JVC GR-DVL515 Instructions Manual page 51

Menu Screen Explanations (cont.)
Each setting is linked with "
" SYSTEM", which appears when the Power
Switch is set to "
The parameters are the same as in the
description on pg. 48, 49.
(GR-DVL915/DVL715/DVL515 only)
PLAYBACK SOUND
During video playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on pg. 50, select "SOUND
MODE" or "12BIT MODE" from the Menu Screen
and set it to the desired parameter.
SOUND MODE
12BIT MODE
: Factory-preset
NOTES:
● The "SOUND MODE" setting is available for both 12-bit and 16-bit sound. (In previous models' functions,
"12-bit" is called "32 kHz" and "16-bit" is called "48 kHz".)
● You can also use the provided remote control's AUDIO MONITOR button to change the output sound
(without having to access the Playback Menu). Make sure you point the remote control at the camcorder's
remote sensor.
● The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
Downloaded from:
DISPLAY" or
" ( pg. 48, 49).
pg. 28 – 36
STEREO Sound is output on both "L" and "R" channels in stereo.
SOUND L Sound from the "L" channel is output in stereo.
SOUND R Sound from the "R" channel is output in stereo.
MIX Original and dubbed sounds are combined and output in stereo on
both "L" and "R" channels in stereo.
SOUND 1 Original sound is output on both "L" and "R" channels in stereo.
SOUND 2 Dubbed sound is output on both "L" and "R" channels in stereo.
https://www.usersmanualguide.com/
DISPLAY
ON SCREEN setting:
12B I T / SOUND1 SP 4
For playback sound, tape
speed and tape running
during video playback.
DATE/TIME setting:
25 . 1
25 . 12 . 01 1
TIME CODE setting: For time code.
12 : 34 : 24
51
EN
6 100-0001
1 / 50
For directory, file name,
index number and total
number during D.S.C.
playback (GR-DVL915/
DVL715/DVL515 only).
For date during D.S.C.
playback
(GR-DVL915/DVL715/
DVL515 only).
For date/time during
video playback.
2 . 0 1
7 : 3 0
Minutes
Seconds
Frames*
*25 frames = 1 second