Using The Remote Control Unit; Installing The Batteries - JVC GR-DVL515 Instructions Manual

USING THE REMOTE CONTROL UNIT

2
1
Knob
Remote sensor
Downloaded from:
3
1
Transmitted beam
effective area
5 m
30°
https://www.usersmanualguide.com/
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR.
Installing The Battery
The remote control uses one lithium battery
(CR2025).
1
Pull out the battery holder while pressing the
knob as shown.
2
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
( pg. 2).
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.
30°
57
EN