Dubbing Images Stored In A Memory Card To A Tape (Gr-Dvl915/Dvl715/Dvl515 Only) - JVC GR-DVL515 Instructions Manual

SNAPSHOT Button
Power Switch
Rewind Button (2)
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)
Display
T O C OP Y T O
P US H " SN A PS
Downloaded from:
Lock Button
Fast-Forward Button (3)
T A P E
H O T "
REC
https://www.usersmanualguide.com/
Dubbing Images Stored In A Memory Card
To A Tape
(GR-DVL915/DVL715/DVL515 only)
Images can be dubbed from a memory card to a tape.
1
Load a memory card (
( pg. 12).
2
To locate the point where you wish to dub a still
image, play back the tape. Stop playback at the
desired point.
3
Set the VIDEO/DSC Switch to "
2
Power Switch to "
Lock Button located on the switch.
4
To select a still image to be dubbed, perform Index
3
Playback ( pg. 29), Auto Playback (
press 2 or 3 to select the image you wish.
5
To engage Dub-Standby, press SNAPSHOT. The
message "TO COPY TO TAPE PUSH "SNAPSHOT""
appears.
6
While the message is being displayed, press
SNAPSHOT. The selected still image is recorded on
the tape for approx. 5 seconds.
•The indicator disappears when dubbing is
complete.
NOTE:
If SNAPSHOT is pressed in step 5 when the tape's erase
protection tab is set to "SAVE", the message "COPYING
FAILED" is displayed.
EN
pg. 14) and cassette
", then set the
" while pressing down the
pg. 28) or
55