JVC GR-DVL515 Instructions Manual page 74

74
EN
SYMPTOM
16. The picture wipe function
does not work.
17. Scene transition does not go
as expected.
18. The Video Echo mode does
not work.
19. Even when Slow Shutter is
not selected, the image looks
like it is activated.
20. There is no strobe when the
Classic Film or Strobe mode
is activated.
21. White Balance cannot be
activated.
22. When shooting a subject
illuminated by bright light,
vertical lines appear.
23. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for an
instant.
24. During recording, the date/
time does not appear.
25. Images stored in the memory
card cannot be deleted.
Downloaded from:
16. • The Slow Shutter mode is
• "WIDE MODE" is not set to
17. • When using "Picture Wipe/
18. • The Picture Wipe or
• "WIDE MODE" is set to
• A Fade-In or Fade-Out is in
19. • When shooting in the dark,
20. • The Picture Wipe or Dissolve
21. • The Sepia or Monotone mode
22. • This is a result of exceedingly
23. • This is not a malfunction.
24. • "DATE/TIME" is set to "OFF"
25. • Images stored in the memory
https://www.usersmanualguide.com/
TROUBLESHOOTING
POSSIBLE CAUSES
activated.
"OFF".
Dissolve" ( pg. 40), there is
a delay of a fraction of a
second between the previous
record stop-point and the
Dissolve start-point. This is
normal, but this slight delay
becomes especially notice-
able when shooting fast-
moving subject or during
rapid panning.
Dissolve functions are in use.
"SQUEEZE" in the Menu
Screen.
progress.
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
function is in use.
is activated.
high contrast, and is not a
malfunction.
in the Menu Screen.
card are protected.
CORRECTIVE ACTION
16. • Disengage the Slow Shutter
mode or set "WIDE MODE"
to "OFF" before preparing to
use the Picture Wipe
( pg. 38, 40, 48).
17.
————
18. • Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 48).
• Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out ( pg. 38, 40).
19. • If you want the lighting to
look more natural, set GAIN
UP to "AGC" or "OFF" in the
Menu Screen ( pg. 47).
20. • Do not try to use the Classic
Film or Strobe mode during a
scene transition (
40).
21. • Turn off Sepia or Monotone
before setting White Balance
( pg. 39, 45).
22.
————
23.
————
24. • Set "DATE/TIME" to "ON" in
the Menu Screen (
25. • Remove protection from the
images stored in the memory
card and delete them
( pg. 31, 32).
(cont.)
pg. 38,
pg. 49).