D.s.c. Recording; Basic Shooting (Snapshot) - JVC GR-DVL515 Instructions Manual

26
EN
SNAPSHOT Button
Power Switch
VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)
Display
SNAP MODE –
Picture Quality
Displays the quality of the stored image: FINE or STD
(standard) (in order of quality) (
F I NE
Total number of shots
Displays the approximate total number of shots that can be stored, including those already taken.
The number increases or decreases depending on the shots stored, the Picture Quality mode, etc.
Card icon
Appears during shooting and blinks when a memory card is not loaded.
Shooting icon
Appears and blinks during shooting.
Downloaded from:
Lock Button
Menu Screen
P I N–UP
FRAME
FUL L
MUL T I – 4
MUL T I – 9
pg. 14).
10 / 100
Number of shots taken
Displays the number of images that have already been shot.
https://www.usersmanualguide.com/

D.S.C. RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a Digital Still Camera for
taking snapshots.
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power ( pg. 8)
● Grip Adjustment (
● Viewfinder Adjustment (
● Loading A Memory Card (
● Picture Quality Mode Setting (
SNAPSHOT MODE SELECTION
1
Set the VIDEO/DSC Switch to "
Power Switch to "
Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select "
CAMERA". Press it and the CAMERA Menu appears.
4
Rotate the MENU/BRIGHT wheel to select "SNAP
MODE", then press it.
5
Rotate the MENU/BRIGHT wheel to select the
desired Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select
"1RETURN" and press it twice. The Menu Screen
closes.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
The image is recorded in the memory card.
•Regardless of the Power Switch position ("
" "), Snapshot recording takes place using the
selected Snapshot mode.
pg. 10)
pg. 10)
pg. 14)
pg. 14)
", then set the
" while pressing down the Lock
" or