Ametek PHANTOM Micro C211 User Manual page 35

BNC CONNECTORS
Multiple signal ports
BNC
T S
PIN NOMENCLATURE/FUNCTION
Input: when a TTL pulse (rising / falling edge) is detected,
Trigger
SDI
• Default setting:
Strobe
Aux 1
• Other signals available through Programmable I/O drop
down list in PCC. Refer to Section 5, Programmable I/O.
• Default setting:
Ready
Aux 2
• Other signals available through Programmable I/O drop
down list in PCC. Refer to Section 5, Programmable I/O.
camera triggers
Output: for HD video
Chapter 6: Suppor t | 31