Advertisement
Backup & Restore: Allows for user and factory settings to
be saved and recalled from the camera's memory.
Resolution: Sets the camera's acquisition resolution. There
are several options in the pull-down menu. Alternatively,
type in a value and the closest valid resolution will be set.
Sample Rate: Sets the acquisition frame rate in frames-
per-second (fps).
Exposure Time (shutter): Sets the exposure time in
degrees, microseconds or percentage (this depends on
how the PCC preferences are set).
Exposure Index: Sets the exposure index (Effective ISO) of the
image by loading preset tone curves. Adjusting gamma, gain
and other settings will contribute to the overall EI value, and this
combined value is what should be used to determine lighting.
CSR (Current Session Reference): Closes the camera's internal
shutter and resets the black point of every pixel for optimal
image quality.
Image Range and Trigger Position: The slider represents the
memory buffer, with the 'Duration' indicated in seconds and the
total number of frames available.
The trigger position is indicated in the 'Last' pull-down menu
and as the 'T' slider along the timeline. The trigger position is
exactly when the trigger signal will be detected in the Cine.
KE Y ADVANCED SE T TINGS
The "Start/End of Recording Actions" section provides options of
actions that can automatically be performed at the start or end
of each shot, including:
•
Auto save to Flash: This feature saves a user-specified
portion of a clip to the internal Flash immediately after
recording.
•
Auto play Video Out: Begins playback after recording.
The range marked under 'Auto play Video Out' affects
both playback and saving to the internal Flash.
•
Restart Recording: When enabled, automatically restarts the recording process
after the 'Auto' actions have been performed.
Chapter 4: Control via Phantom Soft ware | 15
Advertisement
