Signals & Programmable I/O - Ametek PHANTOM Micro C211 User Manual

INTRODUCTION TO SIGNALS
Phantom cameras incorporate multiple hardware signals to interface to external devices.
The Aux ports on Phantom C211 cameras are programmable. The Programmable I/O ports
have a default setting which will be set after a factory reset or by using the 'signal default'
function in PCC.
Port Map for Programmable I/O Access
Programmable I/O incorporates a pulse processor. In addition to assigning different
Port Label
Trigger
Aux 1
Aux 2
C211 PORTS
Default setting
Trigger
Strobe
Ready
Programmable
I/O Capability
Fixed
Prog. I/O
Prog. I/O
Chapter 5: Signal s & Programmable I/O | 21
Programmable
IO Port in PCC
Port 1
Port 4
Port 5