Making Calls; Using The Handset - Panasonic KX-TG5240M Operating Instructions Manual

Making Calls

System capabilities (Operating more than one handset, p. 3)
Up to 3 extensions (3 handsets or 2 handsets and the base unit) can operate at a
time. The maximum operating number may decrease depending on the state of use.

Using the Handset

1
Press [C].
• "Talk" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
To hang up, press [OFF] or place
the handset on the base unit or
charger (for KX-TG5243 or
accessory handset users, p. 3).
To have a hands-free phone
conversation
1
Press [s].
• "SP-phone" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
When the other party answers, talk
into the microphone.
4
To hang up, press [OFF] or place the
handset on the base unit or charger.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If you or the other party has difficulty hearing, press [d] to decrease the
speaker volume.
• While talking using [C], you can switch to a hands-free phone conversation
by pressing [s]. To switch back to the receiver, press [C].
For assistance, please call: 1-800-211-PANA(7262)
Handset
[
[ ]
Soft Keys
]
[OFF]
[B], [d]
[REDIAL]
Microphone
[HOLD/INTERCOM]
27