Panasonic KX-TG5240M Operating Instructions Manual page 55

To monitor with
The unit to be monitored must not be in use and the handset to be monitored
must be off the base unit.
1
Press [HOLD/INTERCOM], then press the soft key (
2
To call the base unit, press [0].
To call another handset, press its extension
number ([1] to [4]).
• To monitor from the speaker, press [s]. If the
handset is placed on the base unit, monitoring
will be stopped. You can place the handset on
the charger and continue monitoring. To switch
back to the receiver, press [C].
3
To end monitoring, press [OFF].
• The monitored user can stop being monitored by:
— on the handset, press [OFF] or place the handset on the base unit.
— on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• "Room monitor" is also displayed on the monitored handset.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator light flashes and the SP-PHONE indicator lights.
To monitor with
The handset to be monitored must not be in use and off the base unit.
1
Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE].
• The LOCATOR/INTERCOM/TRANSFER indicator flashes.
2
To call the handset, press its extension number [1] ( ) to [4] ( ).
3
To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• The indicator light goes out.
• If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.
For assistance, please call: 1-800-211-PANA(7262)
Handset
Base Unit
Room Monitor
).
MONITOR
Press extension#
for room monitor
1-4=Handset
0=Base
Room monitor
00-00-05
D01
55