Panasonic KX-TG5240M Operating Instructions Manual page 79

Menu item
Number of rings
Recording time
Remote code
Recording mode
Mailbox 2&3
passwords
Change language
Room monitor
(Handset)
Message alert
Ringer tone
(Base unit)
Incoming call tone
(Base unit)
Room monitor (Base unit)
Handset registration
Handset deregistration [0] [0] [2]
Talking Caller ID (Base unit) [0] [*] [4] [1] : On [0] : Off
During programming:
When " " or "
SAVE
settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
1
* You need to first download melody data from the openLCR web site.
2
* This feature can be used to activate Caller IQ. See the leaflet included with this
unit for more information.
3
* For openLCR subscribers only.
4
* For openLCR subscribers only. If information is not downloaded to your unit, "Get
new Info.?" will be displayed. To download information, see page 92.
5
* After pressing [7], make sure "View Info.?" is displayed, then press the next
command. If Caller IQ is turned off, "Turn CIQ on?" is displayed after pressing [7].
For assistance, please call: 1-800-211-PANA(7262)
Command
[0] [6] [1] [2]–[7] : 2–7 rings
[0] : Toll saver
[0] [6] [2] [1] : 1 minute [2] : 2 minutes
[3] : 3 minutes [0] : Greeting only
[0] [6] [3] Go to Step 5 on page 71.
[0] [6] [4] [1] : Standard recording
[2] : Enhanced recording
[0] [6] [5] Go to Step 5 on page 62.
[0] [8] [1] : English [2] : Spanish
[0] [9] [1] : On [0] : Off
[0] [#] [1] : On [0] : Off
[0] [*] [1] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody
[0] [*] [2] [1] : On [2] : Twice [0] : Off
[0] [*] [3] [1] : On [0] : Off
[0] [0] [1] Go to Step 5 on page 81.
[3] [3] [5]
" is displayed, press the right soft key to save the new
O K
Direct Commands
Selection items
1
pattern 1–2 *
Page
p. 25
p. 24
–
p. 26
–
p. 18
p. 54
p. 26
p. 22
p. 59
p. 54
–
p. 80
p. 34
79